Page 122 - CAT-028-1 SFeedUp New Products Catalog

122
NEW 3-FLUTE SOLID CARBIDE DRILL FOR 50% HIGHER FEED RATES!
• 3-flute geometry increases productivity by at least 50%
• Self-centering geometry provides precise and accurate holes
• Very high stability in the cut due to its specially designed edge geometry
- Reinforced cutting edge
- Side geometry that minimizes heat and reduces cutting forces • 3 coolant outlet holes to maximum flow and evacuate chips
• New PVD-coated grade IN2205, blue in color for easy identification
• Suitable for steel and cast iron drilling
SERIES FR (3XD)
3-FLUTE SOLID CARBIDE DRILLS WITH COOLANT HOLES
Part Number
FR0397017T7R01 FR0400017T7R01 FR0450017T7R01 FR0476017T7R01 FR0500020T7R01 FR0510020T7R01 FR0550020T7R01 FR0556020T7R01 FR0600020T7R01 FR0635024T0R01 FR0650024T0R01 FR0680024T0R01 FR0700024T0R01 FR0714024T0R01 FR0750029T0R01 FR0794029T0R01 FR0800029T0R01 FR0850035T1R01 FR0860035T1R01 FR0873035T1R01 FR0900035T1R01 FR0950035T1R01 FR0953035T1R01 FR1000035T1R01 FR1030040T2R01 FR1050040T2R01 FR1100040T2R01 FR1111040T2R01 FR1150040T2R01 FR1191040T2R01 FR1200040T2R01
DC DC DC
PL LU
Point Usable Length Length (mm) (mm)
0.80 17 0.82 17 0.88 17 0.90 17 0.96 20 0.98 20
1.08 20
1.09 20
1.17 20 1.20 24 1.26 24 1.29 24 1.35 24 1.38 29 1.40 29
1.48 29
1.49 29
1.63 35
1.64 35
1.65 35
1.72 35
1.75 35
1.76 35
1.85 35 1.88 40 1.98 40
2.07 40
2.08 40
2.12 40
2.20 40
2.21 40
LCF LS OAL
Chip Flute Shank Overall Length Length Length (mm) (mm) (mm)
25 35 66 25 35 66 25 35 66 25 35 66 29 36 66 29 36 66 29 36 66 29 36 66 29 36 66 35 36 79 35 36 79 35 36 79 35 36 79 42 36 79 42 36 79 42 36 79 42 36 79 48 40 89 48 40 89 48 40 89 48 40 89 48 40 89 48 40 89 48 40 89 55 45 102 55 45 102 55 45 102 56 45 102 56 45 102 56 45 102 56 45 102
Cutting Dia. (mm)
3.97 4.00 4.50 4.76 5.00 5.10 5.50 5.56 6.00 6.35 6.50 6.80 7.00 7.14 7.50 7.94 8.00 8.50 8.60 8.73 9.00 9.50 9.53 10.00 10.30 10.50 11.00 11.11 11.50 11.91 12.00
Cutting Dia. Cutting Dia. (inch) (fraction)
0.1563 5/32" 0.1575 - 0.1772 - 0.1875 3/16" 0.1969 - 0.2008 - 0.2165 - 0.2188 7/32" 0.2362 - 0.2500 1/4" 0.2559 - 0.2677 - 0.2756 - 0.2813 9/32" 0.2953 - 0.3126 5/16" 0.3150 - 0.3346 - 0.3386 - 0.3438 11/32" 0.3543 - 0.3740 - 0.3752 3/8" 0.3937 - 0.4063 13/32" 0.4134 - 0.4331 - 0.4375 7/16" 0.4528 - 0.4688 15/32" 0.4724 -
140oSIG LU PL LCF
OAL
Drilling Coolant
DCON LS
DCON
Shank Diameter (mm)
6 • 6 • 6 • 6 • 6 • 6 • 6 • 6 • 6 • 8 • 8 • 8 • 8 • 8 • 8 • 8 • 8 • 10 • 10 • 10 • 10 • 10 • 10 • 10 • 12 • 12 • 12 • 12 • 12 • 12 • 12 •
Grade IN2505
DCm7