Page 181 - CAT-028-1 SFeedUp New Products Catalog

HIGH-FEED CBN INSERTS FOR HARDENED MATERIALS
• T-Clamp CBN inserts for high feed turning of high-hardened workpiece materials
• Inclined chip breaker for good chip control at shallow depths of cut (Maximum .0047") • Optimized cutting edge design for high feed bi-directional turning
• Excellent surface finish
• Significantly improved productivity with a maximum feed rate from .031-.047 ipr
ID Threa•d TB20OD1T5hreCadBN grBaadlaneced Spot Drill Helical Interp. Facing Lead Angle Plunge
- Excellent combination of high hardness and moderate fracture toughness - Continuous and light interrupted machining of hardened steel
Slot
Pocket
Chamfer
Face Groove
Face Groove/Turn
ID Groove
RE CW
BSR 7°AN
ID fnr Groove/Turn
ID fnr Relief Groove/Turn
ID Groove/Turn
ID fnr Groove
ID fnr Profile
ID Groove/Thread
OD fnr Groove/ Turn Taper
OD fnr Profile
OD Part-Off
OD Groove
Face fnr Relief
Ream Flat Bottom Corner Rnd Coutersink Contour Ramp
Drill Channel
DrillMill Slab
OD fnr Groove/TurnOD Groove/Thread
OD fnr Groove
CBN INSERTS FOR HIGH FEED TURNING
T-Slot Hole Chamfer
Balanced
Engrave
Cooling
Shoulder
Turning
Part Number
TSG 3.0-0.3-HF TSG 5.0-0.3-HF
SSC
Insert Seat Size
3 5
CW
Cutting Width
.118 (3mm) .197 (5mm)
RE
Corner Radius
0.012 0.012
WB
Body Width
0.087 0.157
Dimensions (inch) INSL
Insert Length
0.79 0.98
S1
BSR
INSL WB
ap Feed Depth of Cut (ipr)
(inch)
.003-.005 .016-.031 .003-.005 .016-.047
CBN TB2015
• •
•: Standard items
9o
.047" (1.2mm) for 3mm wide insert .118" (3.0mm) for 5mm wide insert
R 30mm
SERIES TSG-HF
parting & grooving
T-Clamp CBN High Feed inserts feature 9-degree lead angles (left and right sides) along with a large radius on the end of the insert in order to reduce vibration. The presence of these features should be taken into consideration when programming the work piece.
Wiper Edge Radius
1.18 1.18
OD Groove/Turn
181