Page 57 - CAT-028-1 SFeedUp New Products Catalog
P. 57
MINI SIZED 90o SHOULDER AND HIGH-FEED MILLS WITH STRONG V-SHAPED INSERT
• FNKT-M is for 90°roughing, FNKT-L is for 90° finishing with lower cutting forces & UNKT-HF is for Hi-Feed Roughing • 90° and Hi-Feed inserts fit the same pockets
• Integrated wiper flats produce 32-63 Ra surface finishes
• V-Bottom pocket fosters easy insert indexing, increased core diameter and minimizes insert screw stress
milling
• High cutter densities with small IC insert sizes
• All cutters are plumbed with coolant through the tool • Economical solid carbide alternative!
90° END MILL (5MM INSERT)
Part Number
12J1A-0300977R01 12J1A-0400978R01 12J1A-0500978R01 12J1A-0501079R01
DC
Cutting Dia.
0.375 0.437 0.500 0.500
LUX
Usable Length Max.
0.90 0.93 0.93 1.05
OAL ZEFF
Overall Eff. Length Teeth
2.50 3 2.75 3 2.75 4 3.00 4
DCON
Shank Dia.
0.375 0.500 0.500 0.625
When using Hi-Feed Insert, modify body corner to R.070.
05 SERIES 12J1A (WELDON SHANK)
DC WEP
LPR
Protruding Length
0.94 0.97 0.97 1.09
WEP - See insert drawing for wiper options.
Shoulder
Channel Ramp
Corkscrew
Facing
DCON
Coolant
OAL LUX
90°KAPR .19APMX
LPR
57
