Page 94 - CAT-028-1 SFeedUp New Products Catalog

94
TAPER FORM FINISHER FOR NON-FERROUS
Part Number
46W08009TQRB011 46W10013T6RB021 46W12013T8RB031 46W16017TRRB041
DC
Cutting Diameter
8.00 mm 10.00 mm 12.00 mm 16.00 mm
PRFRAD1
Profile Radius
1.50 mm 2.00 mm 3.00 mm 4.00 mm
PRFRAD2
Profile Radius
250.00 mm 250.00 mm 250.00 mm 500.00 mm
PRFRAD3
Profile Radius
4.00 mm 5.00 mm 6.00 mm 8.00 mm
APMX
Depth of Cut Max.
10 mm 14 mm 14 mm 17 mm
LF ZEFF
Functional Effective Length Flutes
FHA
Flute Helix Angle
DHUB
Hub Diameter
7.60 mm 9.30 mm 11.50 mm 15.20 mm
When assembling, be sure tip is seated firmly on shank with no gap. Tightening Torque: T05=60in*lbs, No lubricant on adaption. Wrenches sold separately.
46W08009TQRB011 46W10013T6RB021 46W12013T8RB031 46W16017TRRB041
Thin Wrench
WS-0043 WS-0029 WS-0030 WS-0044
46W_1 HARDWARE
**OPTIONAL** Torque Wrench
DT-60-06 DT-90-08 DT-130-10 DT-250-13
SERIES 46W_1
70°PRFA PRFRAD1
PRFRAD2 PRFRAD3
APMX LF
DC
Connection Code
15.40 mm 3
19.40 mm 3
23.40 mm 3
26.00 mm 3
T06=90in*lbs, T08=130in*lbs, T10=250in*lbs.
30 30 30 30
Chip Surfer T05 Chip Surfer T06 Chip Surfer T08 Chip Surfer T10
Shoulder
Contouring
CCMS DHUB
CCMS
Slabbing