Page 25 - CAT-027-6 IT.TE.DI. Catalog

PCD
INSERTS
RECOMMENDED GRADE FOR ALUMINUM ALLOYS WITH Si < 12 - 14% AND MAGNESIUM ALLOYS
Recommended for finishing not square shoulder surfaces.Suitablefor light roughing too.
Achievable surface: 0.3≤Ra≤0.8
Suitable for finishing rough (gasket) surfaces
Achievable surface: 0.8≤Ra≤3.2
GEOMETRY
GEOMETRY
GEOMETRY
GEOMETRY
GEOMETRY
GEOMETRY
01
02
Recommended for finishing square shoulder surfaces. Suitable for light roughing too.
Achievable surface: 0.3≤Ra≤0.8
05
Suitable for roughing or for cutting material with a high impurity content.
(Cubing)
Achievable surface: 0.4≤Ra≤1
45
Suitable for finishing to medium roughing
Achievable surface: 0.4≤Ra≤1
07
09
01
02
45
Suitable for finishing or roughing - general purpose.
Achievable surface: 0.4≤Ra<1
07
01
02
02
02
WIPER
WIPER
Achievable Surface: Achievable Surface: Achievable Surface: Achievable Surface: 0.1≤Ra≤0.5 0.1≤Ra≤0.5 0.1≤Ra≤0.5 0.1≤Ra≤0.5
WIPER
WIPER
CBN
INSERTS
RECOMMENDED GRADE FOR GREY CAST IRONS AND NON FERROUS CAST IRONS
Recommended for finishing not square shoulder surfaces.
Achievable surface:
0.4≤Ra≤0.8 0.4≤Ra≤0.8
Recommended for roughing square shoulder surfaces.
Achievable surface:
GEOMETRY
GEOMETRY
91
92
Recommended for finishing square shoulder surfaces.
Achievable surface: 0.4≤Ra≤0.8
45
GEOMETRY
Recommended for finishing square shoulder surfaces.
Achievable surface: 0.4≤Ra≤0.8
05
GEOMETRY
91
92
45
92
05
92
92
92
WIPER
WIPER
Achievable Surface: Achievable Surface: Achievable Surface: Achievable Surface: 0.2≤Ra≤0.5 0.2≤Ra≤0.5 0.2≤Ra≤0.5 0.2≤Ra≤0.5
WIPER
WIPER
25
TEDI FEED®